parts catalog

TUBE AS 3157499 - Caterpillar

3157499 TUBE AS Caterpillar parts TUBE
Alternative (cross code) number:
Caterpillar 3157499 TUBE AS

Buy TUBE AS 3157499 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register


Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 4C-5599 Anti-Seize Compound 1
Illustration 1 g01835135
Disconnect hose assembly (1) and tube assembly (3).
Remove nuts (4) and remove turbocharger (2).
Illustration 2 g02547424Note: Loosen both V-band clamp nuts only enough to allow the housing to rotate. Excessive loosening of the housing will cause contact. Possible damage to the wheel may occur.Note: Note the orientation of each V-band clamp for installation purposes.
Carefully remove and discard V-band clamps (5) and (6). Installation Procedure
Note: Put clean engine oil in the oil inlet of the turbocharger after assembly or before installation to provide lubrication during start-up and during storage.
Install turbocharger (2) in the reverse order of removal.
Tighten V-Band clamp (5) to a torque of 13.6 1.2 N m (120 11 lb in).
Tighten V-Band clamp (10) to a torque of 18 N m (159 lb in). Loosen the nut 1 to 2 turns. Retighten to a torque of 13.6 1.2 N m (120 11 lb in).
Apply Tooling (A) to the threads and mating surface of nuts (8). Tighten to a torque of 54 5 N m (40 4 lb ft).

Parts tube Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.