AVSPARE.COM
parts catalog

TUBE AS 3534558 - Caterpillar



3534558 TUBE AS Caterpillar parts 789D TUBE
Rating:
28
Alternative (cross code) number:
CA3534558
353-4558
3534558
Caterpillar 3534558 TUBE AS
Weight: 2 pounds 1 kg.

Buy TUBE AS 3534558 Caterpillar genuine, new aftermarket tractor parts with delivery
TRUCK,

Compatible equipment models: 3534558:

TRUCK  789D   Caterpillar
Number on catalog scheme: 41
 
  For full view, you need register

Information:

Start By:
Remove the ripper tilt cylinder. Refer to Disassembly and Assembly, "Ripper Tilt Cylinder - Remove and Install".
Remove the ripper carriage. Refer to Disassembly and Assembly, "Ripper Carriage - Remove and Install".
Remove the ripper lift cylinder. Refer to Disassembly and Assembly, "Ripper Lift Cylinder - Remove and Install".
Remove the rear guard and the rear bottom guard. Refer to Disassembly and Assembly, "Bottom Guard - Remove".
Illustration 1 g01095639Note: Tooling (B) will be in position from removal of the ripper tilt cylinder.
Install Tooling (A) and a suitable lifting device to ripper frame (1). The weight of ripper frame (1) is approximately 1589 kg (3500 lb).
Illustration 2 g01095640
Disconnect hose assembly (4) from pin assembly (3).
Remove bolts (2), plate (5), and pin assembly (3).
Repeat Step 2 and Step 3 for the opposite side of the machine.
Illustration 3 g01095641
Remove lip seals (6).
Use Tooling (C) to remove bearings (7). Repeat Step 5 and Step 6 for the other side of the ripper frame.
Illustration 4 g01095821
Remove lip seals (9). Use Tooling (C) to remove bearing (8). Repeat Step 7 for the opposite side of the machine. Installation Procedure
Table 2
Required Tools
Tool Part Number Part Description Qty
A 138-7576 Link Bracket 2
B 4C-6486 Stand 2
8S-7615 Pin 2
8S-7611 Tube 2
D 1P-0520 Driver Gp 1
Illustration 5 g01095639
Use Tooling (A) and a suitable lifting device to position ripper frame (1) on the machine. The weight of ripper frame (1) is approximately 1589 kg (3500 lb).
Support ripper frame (1) with Tooling (B).
Illustration 6 g01095821
Lower the temperature of bearing (8). Install bearing (8). Use Tooling (D) to install lip seals (9). Repeat Step 3 for the other side of the ripper frame.
Illustration 7 g01095641
Lower the temperature of bearings (7). Install bearings (7). Use Tooling (D) to install lip seals (6). Repeat Step 4 for the opposite side of the ripper frame.
Illustration 8 g01095640
Install pin assembly (3), plate (5), and bolts (2).
Connect hose assembly (4) to pin assembly (3).
Repeat Step 5 and Step 6 for the other side of the ripper frame.
Remove Tooling (A) and the suitable lifting device. End By:
Install the rear guard and the rear bottom guard. Refer to Disassembly and Assembly, "Bottom Guard - Install".
Install the ripper lift cylinder. Refer to Disassembly and Assembly, "Ripper Lift Cylinder - Remove and Install".
Install the ripper carriage. Refer to Disassembly and Assembly, "Ripper Carriage - Remove and Install".
Install ripper tilt cylinder. Refer to disassembly and Assembly, "Ripper Tilt Cylinder - Remove and Install".

Caterpillar parts catalog:

Caterpillar parts catalog
789D Off-Highway Truck SPD00001-UP (MACHINE) POWERED BY 3516 Engine
789D XQ Off-Highway Truck SHH00001-UP (MACHINE) POWERED BY 3516 Engine


Parts tube Caterpillar catalog:

7X2049 TUBE AS-REFRIGERANT ORIFICE
120H, 120H ES, 120H NA, 12H, 12H ES, 12H NA, 135H, 135H NA, 140H, 140H ES, 140H NA, 143H, 14H, 14H NA, 160H, 160H ES, 160H NA, 163H, 163H NA, 16H, 307B, 317B LN, 318B, 322B L, 325B L, 330B L, 345B, 34...
5P6006 TUBE-HEAT SHRINK
120M 2, 12M 2, 140H ES, 140M 2, 160H ES, 160M 2, 215, 216, 225, 227, 228, 235, 236, 242B3, 245, 247, 248, 267, 287, 302.5, 303.5, 307D, 3116, 311B, 3126, 3126B, 320B, 320D FM, 320D L, 324D, 325B, 325D...
7C7678 TUBE AS
3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B, 3516C, 5130, 5130B, 5230, 5230B, 776C, 776D, 777, 777B, 777C, 777D, 784B, 784C, 785, 785B, 785C, 785D, 789, 789B, 789C, 789D, 793, 793B, 793C, 793D...
7C7677 TUBE AS
3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B, 3516C, 5130, 5130B, 5230, 5230B, 776C, 776D, 777, 777B, 777C, 777D, 784B, 784C, 785, 785B, 785C, 785D, 789, 789B, 789C, 789D, 793, 793B, 793C, 793D...
4W5977 TUBE AS
3508B, 3512B, 3516B, 5130, 776C, 776D, 777, 777B, 777C, 777D, 784B, 784C, 785, 785B, 785C, 785D, 789, 789B, 789C, 789D, 793, 793B, 793C, 793D, 797, 797B, 994, 994D, 994F, 994H
1054301 TUBE
3516B, 785C, 789B, 789C, 789D, 793, 793B, 793C, 994, 994D, 994F, 994H
1196372 TUBE
5130B, 5230B, 776D, 777, 777B, 777C, 777D, 785C, 789, 789B, 789C, 789D, 994D
Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.