AVSPARE.COM
parts catalog

TUBE AS 3534988 - Caterpillar



3534988 TUBE AS Caterpillar parts 793F CMD TUBE
Rating:
29
Alternative (cross code) number:
CA3534988
353-4988
3534988
Caterpillar 3534988 TUBE AS
Weight: 2 pounds 0 kg.

Buy TUBE AS 3534988 Caterpillar genuine, new aftermarket tractor parts with delivery
TRUCK,

Compatible equipment models: 3534988:

TRUCK  793F CMD   Caterpillar
Number on catalog scheme: 66
 
  For full view, you need register

Information:


Apply gear oil through the fittings with a hand operated lubrication pump or a suitable grease gun. Use of pressure operated lubricating equipment damages the seals.
Before and after the equalizer bar end pin is filled with gear oil, seal (1) must be flush with the equalizer bar. If the seals are not flush, damage to the seals can result by overfilling.
Illustration 1 g00586840
Typical lubrication pump
The equalizer bar end pins are located between the front track roller frame and the main frame assembly.
Illustration 2 g01963428
Illustration 3 g01415023
Clean the areas that are around the end pin with a high pressure wash. Inspect the condition of the seal (1).
Check the area for oil leakage. Be sure that the seal is in a neutral position.
Remove plug (2).
Check the oil level. Oil level (4) should be at the top of the hex head on the fitting.
If the oil level is low, apply the gear oil through fitting (3) until the gear oil reaches oil level (4) at the top of the hex head on the fitting. Remove any excess oil. This will maintain a volume of air. The gear oil must be applied with a 7H-1680 Lubrication Hand Pump. Refer to Operation and Maintenance Manual, "Lubricant Viscosities" for the correct oil. The gear oil has excellent load carrying capacity.
Be sure that seals (1) are not pushed out. Push back the seals if the seals are pushed out.
Install plug (2). Note: MPGM GREASE IS ALLOWED ONLY FOR A FAILED SEAL. THE SEAL SHOULD BE REPLACED AS SOON AS POSSIBLE. THE COMBINATION OF GEAR OIL AND MPGM IS NOT HARMFUL TO THE MACHINE.When you operate the machine in arctic conditions, lubricate the equalizer bar with EMGARD EP 75W90 gear lubricant. EMGARD EP 75W90 gear lubricant is a synthetic lubricant. This lubricant is available from Hudson Corporation.

Caterpillar parts catalog:

Caterpillar parts catalog
793F OFF-HIGHWAY TRUCK D3T00001-UP (MACHINE) POWERED BY C175 ENGINE
793F CMD Off-Highway Truck (Command for Hauling) RBT00001-UP (MACHINE) POWERED BY C175-16 Engine


Parts tube Caterpillar catalog:

8T6342 TUBE-HEAT SHRINK
120G, 16G, 3116, 3176, 325 L, 325 LN, 3406C, 3412, 3412C, 3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B, 3516C, 3606, 3608, 3612, 3616, 5130, 572R II, 621G, 621H, 621K, 623G, 623H, 623K, 623K LR...
3572998 TUBE AS
793F, 793F AC, 793F CMD, 793F OEM, 793F-XQ, 795F AC, 795F XQ, 797F, 993K
3185136 TUBE-VENT
777F, 777G, 785C, 785D, 789C, 789D, 793D, 793F, 793F AC, 793F CMD, 793F OEM, 793F-XQ, 795F AC, 795F XQ, 797B, 797F
2958735 TUBE AS
793D, 793F, 793F AC, 793F CMD, 793F OEM, 793F-XQ, 795F AC, 795F XQ, 797F
3413723 TUBE AS
793F, 793F CMD, 793F OEM, 793F-XQ
3002564 TUBE
793F, 793F CMD, 793F OEM, 793F-XQ
2958687 TUBE AS
793F, 793F AC, 793F CMD, 793F-XQ
2971876 TUBE AS
793F, 793F CMD, 793F OEM
Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.