AVSPARE.COM
parts catalog

TUBE AS 3598822 - Caterpillar



3598822 TUBE AS Caterpillar parts 314D LCR TUBE
Rating:
14
Alternative (cross code) number:
CA3598822
359-8822
3598822
Caterpillar 3598822 TUBE AS
Weight: 3 pounds 1 kg.

Buy TUBE AS 3598822 Caterpillar genuine, new aftermarket tractor parts with delivery
EXCAVATOR,

Compatible equipment models: 3598822:

EXCAVATOR  314D LCR   Caterpillar
Number on catalog scheme: 16
 
  For full view, you need register

Information:

START BY:a. remove flywheel housingb. remove oil pan platec. remove camshaft 1. Remove the camshaft bearings from the cylinder block with tooling (A). Start with the front bearing and work to the rear.Install Camshaft Bearings
1. Use tooling (A) to install the camshaft bearings in both the 3304 and 3306 cylinder blocks. 2. Install the camshaft bearings in the 3304 cylinder block as follows:a. Install the front bearing to a depth of 0.5 0.5 mm (.02 .02 in.) and with the oil holes in a horizontal position and the joint at the top of the engine. The joint can not be more than 15° from vertical in either direction.b. Install the center bearing to a depth of 303.2 0.5 mm (11.94 .02 in.) and with the oil hole in alignment with the oil hole in the cylinder block.c. Install the rear bearing to a depth of 604.9 0.5 mm (23.81 .02 in.) and with the oil hole in alignment with the oil hole in the cylinder block. 3. Install the camshaft bearings in the 3306 cylinder block as follows:a. Install the front bearing to a depth of 0.5 0.5 mm (.02 .02 in.) and with the oil holes in a horizontal position and the joint at the top of the engine. The joint can not be more than 15° from vertical in either direction.b. Install the remainder of the bearings with the oil holes in alignment with the oil holes in the cylinder block. Install the bearings to the dimensions given from the front face of the cylinder block: A) 154.0 0.5 mm (6.06 .02 in.) B) 303.2 0.5 mm (11.94 .02 in.), C) 601.7 0.5 mm (23.69 .02 in.), D) 903.4 0.5 mm (35.57 .02 in.).END BY:a. install flywheel housingb. install camshaftc. install oil pan plate

Caterpillar parts catalog:

Caterpillar parts catalog
314D LCR Excavator SBP00001-UP (MACHINE) POWERED BY C4.2 Engine
314D LCR Excavator TXN00001-UP (MACHINE) POWERED BY C4.2 Engine


Parts tube Caterpillar catalog:

5I4940 TUBE
311, 311B, 311C, 311D LRR, 312B, 312C, 312C L, 312D, 312D L, 313D, 314C, 314D CR, 314D LCR, 315D L, 318C, 318D L, 319C, 319D, 319D L, 319D LN, 320 L, 320B, 320C, 320C FM, 320C L, 320D, 320D FM, 320D F...
2887698 TUBE AS
311D LRR, 312D, 312D L, 312D2, 312E, 312E L, 314D CR, 314D LCR
3937868 TUBE AS
311D LRR, 311F LRR, 312D, 312D L, 312D2, 312D2 GC, 312D2 L, 312E, 312E L, 313D2, 313D2 LGP, 314D CR, 314D LCR, 314E CR, 314E LCR
3284828 TUBE AS
314D CR, 314D LCR
2181154 TUBE AS
314C, 314D CR, 314D LCR
2827510 TUBE AS
314D CR, 314D LCR, 314E CR, 314E LCR
2452338 TUBE AS
314C, 314D CR, 314D LCR, 314E CR, 314E LCR
Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.