AVSPARE.COM
parts catalog

TUBE AS 3598851 - Caterpillar



3598851 TUBE AS Caterpillar parts 311D LRR TUBE
Rating:
70
Alternative (cross code) number:
CA3598851
359-8851
3598851
Caterpillar 3598851 TUBE AS
Weight: 3 pounds 1 kg.

Buy TUBE AS 3598851 Caterpillar genuine, new aftermarket tractor parts with delivery
EXCAVATOR,

Compatible equipment models: 3598851:

EXCAVATOR  311D LRR   Caterpillar
Number on catalog scheme: 23
 
  For full view, you need register

Information:

1. Drain the heat exchanger by removing plug (1). If it is difficult to gain access to this plug, there are several others on the heat exchanger that can also be removed to drain the heat exchanger. 2. Remove two bolts (2) and remove two other bolts (5). All four of these bolts secure flanges that hold pipe (4). Remove bolt, nut and clamp (3) and slowly remove pipe (4). Pipe (4) may still have some water in it. Use caution to avoid spilling coolant on exhaust manifolds and shields. 3. Remove two bolts (7) and remove two other bolts (10). All four of these bolts also secure flanges that hold pipe (9). Slowly remove pipe (9). Remove two bolts (8) securing the flange on pipe (6).
Use caution when removing the heat exchanger. In some applications, due to the angle of attachment necessary to remove the heat exchanger it can swing outward when the last bracket is removed.
4. Place alignment marks on the shell of the heat exchanger and the inner portion of the brackets. This will allow for easy pipe alignment during reassembly. Attach tooling A to the heat exchanger as illustrated. Remove eight bolts, two from each of the four bracket assemblies and remove each of the brackets (11). 5. Slowly remove the heat exchanger from the engine. Due to the design of the heat exchanger it will be heavier in the front than in the rear. Weight of the heat exchanger is 186 kg (410 lb). Installation of the heat exchanger is accomplished in the exact reverse order from removal. Prior to installation, lubricate the seal on the ends of pipe (4), (6), and (8) with clean oil to insure proper installation.Disassemble And Assemble Heat Exchanger
Start By:a. remove heat exchanger 1. Remove twelve bolts (1) securing the bonnet (2) to the shell of the heat exchanger. Remove bonnet (2). Remove four bolts (3) securing the adapter (4) to bonnet (2). It is not necessary to place alignment marks on the front bonnet and the shell of the heat exchanger. The shell of the heat exchanger contains an alignment pin and the bonnet contain a corresponding hole for the pin. For most applications involving disassembly of the heat exchanger, it is not necessary to remove adapter (4). 2. Remove gasket (5) and two rod assemblies (6). 3. Remove rod (8) from plug (7). 4. Remove twelve bolts (9) securing the other bonnet (10) to the heat exchanger and remove bonnet (10). 5. Remove rubber seal (11) from the inside of heat exchanger shell. Remove forty eight shims (12), four each from under each bolt. Remove plug (14) and remove rod (13) from the plug.6. If it is necessary to remove the heat exchanger core from the shell it will be necessary to press it out from the end without a flange. Use caution when removing the heat exchanger core from the shell. The internal portion is constructed of soft metal and will crush easily. If

Caterpillar parts catalog:

Caterpillar parts catalog
311D LRR Excavator LKA00001-UP (MACHINE) POWERED BY C4.2 Engine


Parts tube Caterpillar catalog:

1193662 TUBE-HEAT SHRINK
216, 216B, 216B3, 226B, 226B3, 228, 232B, 236, 236B, 236B3, 236D, 242B, 242B3, 242D, 246C, 246D, 247, 247B, 247B3, 248, 252B, 252B3, 256C, 257B, 257B3, 257D, 259B3, 259D, 262C, 262C2, 262D, 267, 267B,...
1257876 TUBE-HEAT SHRINK
10-20B, 1090, 1190, 1190T, 120K, 120K 2, 120M, 120M 2, 1290T, 12H, 12K, 12M, 12M 2, 12M 3, 12M 3 AWD, 1390, 140K, 140K 2, 140M, 140M 2, 140M 3, 140M 3 AWD, 160K, 160M 2, 160M 3, 160M 3 AWD, 216, 216B,...
5I4940 TUBE
311, 311B, 311C, 311D LRR, 312B, 312C, 312C L, 312D, 312D L, 313D, 314C, 314D CR, 314D LCR, 315D L, 318C, 318D L, 319C, 319D, 319D L, 319D LN, 320 L, 320B, 320C, 320C FM, 320C L, 320D, 320D FM, 320D F...
2290964 TUBE AS
311C, 311D LRR
1905830 TUBE
311D LRR, 312D, 312D L, 313D, 314D CR, 314D LCR, 315D L, 318C, 318D L, 319C, 319D, 319D L, 319D LN, 320C, 320C FM, 320C L, 320D, 320D FM, 320D FM RR, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 321C,...
2887692 TUBE AS
311D LRR, 311F LRR, 312D, 312D L, 312D2, 314D CR, 314D LCR
2887699 TUBE AS
311D LRR, 311F LRR, 312D, 312D L, 312D2, 312E, 312E L, 314D CR, 314D LCR
3465590 TUBE AS
311D LRR, 312D, 312D L, 312D2, 312E, 312E L, 314D CR, 314D LCR, 314E LCR, PIN GRAB
2852776 TUBE AS
311D LRR, 311F LRR
3937916 TUBE AS
311D LRR, 311F LRR
3852955 TUBE AS
311D LRR, 311F LRR
Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.