AVSPARE.COM
parts catalog

TUBE AS 3598881 - Caterpillar



3598881 TUBE AS Caterpillar parts TUBE
Rating:
51
Alternative (cross code) number:
CA3598881
359-8881
3598881
Caterpillar 3598881 TUBE AS
Weight: 10 pounds 4 kg.

Buy TUBE AS 3598881 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register

Information:


Image1.3.1
Image1.3.2
Image1.3.3
Image1.3.4
Group Number 2
Rework Procedure
Group 2: Engines with #1 Flywheel Housing
Notes:
*See Group 2 affected units
*Only failed risers should be replaced. If the riser on only one side has failed, only order the parts listed for that side in the "Parts Needed" section.
*See rework procedure below for failures of the riser on the right of the engine. Please note that the rework procedure for a left side failure follows the procedure for the right side failure.
Refer to the appropriate Service Manual as Necessary.
RIGHT SIDE
Parts Needed for Right Side Repair:
Image2.1.1
Procedure:
1. Remove Turbocharger. See Turbocharger Removal Procedure, SENR5031.
2. Drain the engine coolant. Refer to Operation and Maintenance Manual, "Refill Capacities and Recommendations".
3. Remove water tube (1), existing 4P-8252 Exhaust Riser, and existing riser support bracket. Exhaust riser and support bracket are not reused. See Image 2.2.1.
4. Replace the 4P-8252 Riser Assembly and support brackets with the new 292-2971 Riser Assembly (2), 292-5555 Support Bracket (3), and 284-7633 Support Bracket (4). Refer to Images 2.2.1 and 2.2.2.
a) Refer to Image 2.2.2. New 0S-1591 Bolts, 9X-6458 Washers, and 293-3286 Spacers are used between riser support brackets (5). 9S-8752 Nuts are reused in this location.
b) New 9X-6458 Washers are used between the support bracket and exhaust riser (6). 0S-1594 bolts are reused in this location.
c) New 0L-2070 Bolts, 2Y-9255 Spacer, and 229-5332 Gasket are used at exhaust manifold flange (7). 108-3612 Spacers should be removed and 2Y-9255 Spacer should be used on the top bolt of the 3-bolt flange. 5M-2894 Washers and 9S-8752 Nuts are reused in this location.
Image2.2.1
Image2.2.2
LEFT SIDE
Parts Needed: See attached Image 2.3.1
Procedure:
1. Remove Turbocharger. See Turbocharger Removal Procedure, SENR5031.
2. Drain the engine coolant. Refer to Operation and Maintenance Manual, "Refill Capacities and Recommendations".
3. Remove water tube (1), existing 4P-8251 Exhaust Riser, and existing riser support bracket. Exhaust riser and support bracket are not reused. See Image 2.3.2.
4. Replace the 4P-8251 Riser Assembly and support brackets with the new 292-2972 Riser Assembly (9), 292-5556 Support Bracket (10), and 284-7634 Support Bracket (11). Refer to Images 2.3.2 and 2.3.3.
a) Refer to Image 2.3.3. New 0S-1591 Bolts, 9X-6458 Washers, and 293-3286 Spacers are used between riser support brackets (12). 9S-8752 Nuts are reused in this location.
b) New 9X-6458 Washers are used between the support bracket and exhaust riser (13). 0S-1594 Bolts are reused in this location.
c) New 0L-2070 Bolts, 2Y-9255 Spacer, and 229-5332 Gasket are used at the exhaust manifold flange (7). 108-3612 Spacers should be removed and 2Y-9255 Spacer should be used on the top bolt of the 3-bolt flange. 5M-2894 Washers and 9S-8752 Nuts are reused in this location.
Parts Needed for Left Side Repair:
Image2.3.1
Image2.3.2
Image2.3.3


Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.