AVSPARE.COM
parts catalog

TUBE AS 3598902 - Caterpillar



3598902 TUBE AS Caterpillar parts TUBE
Rating:
31
Alternative (cross code) number:
CA3598902
359-8902
3598902
Caterpillar 3598902 TUBE AS

Buy TUBE AS 3598902 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register

Information:


AFFECTED PRODUCT
Model Identification Number
3512C SLM00118-00152
TTC00274-00352
TTF00240-00307
TTG00211-00213
3516C JTS00108-00117
TTD00273-00343
TTH00206-00221
TTJ00236-00265
PARTS NEEDED
No parts needed for this program
ACTION REQUIRED
1. Remove the 208-9064 Cover and 226?2779 Element from the air cleaner.
2. If necessary, dry out the element and metal housing.
3. Inspect the turbocharger compressor housing for rust before removing the turbocharger compressor housing. If the housing has rust remove the compressor housing and remove the rust per the appropriate rust removal procedure below.
4. Reinstall turbocharger compressor after rust removal.
5. Reinstall air cleaner.
Rust Removal Procedure:
Definition of types of rust:
- Flash/surface rust - Rust that can be removed with an oiled towel.
- Light rust - No scaling or pitting and cannot be removed with an oiled towel.
- Heavy rust - Scale and pitting.
Removal of rust:
- Flash rust can be removed with penetrating oil such as Kroil or WD40.
- Light rust can be removed with a wire brush. Apply penetrating oil to the surface to prevent future surface rust.
- Heavy rust can be removed with a wire brush to remove the rust but it must also be neutralized with a neutralizing solution such as MP-7. The MP-7 neutralizing solution should be sprayed on until the surface is "wet". Let it stand for 10 minutes to neutralize the surface. Re-spray the surface during this 10 minute period to keep the surface "wet". Flush the surface with water after the 10 minute
neutralization period. Reference SEBF8018 for reuse of the turbocharger compressor housing. Apply penetrating oil to the surface to prevent future surface rust.
OWNER NOTIFICATION
U.S. and Canadian owners will receive the attached Owner Notification.
SERVICE CLAIM ALLOWANCES
Caterpillar Dealer Suggested Customer Suggested
Parts % Labor Hrs% Parts % Labor Hrs% Parts % Labor Hrs%
100% 100% 0% 0% 0% 0%
This is a 5.0-hour job
PARTS DISPOSITION
Handle the parts in accordance with your Warranty Bulletin on warranty parts handling.
MAKE EVERY EFFORT TO COMPLETE THIS PROGRAM AS SOON AS POSSIBLE.
COPY OF OWNER NOTIFICATION FOR U.S. AND CANADIAN OWNERS
XYZ Corporation
3240 Arrow Drive
Anywhere, YZ 99999
PRIORITY - PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING THE TURBOCHARGER COMPRESSOR HOUSING ON CERTAIN 3512C AND 3516C ENGINES
MODELS INVOLVED - 3512C and 3516C Engines
Dear Caterpillar Product Owner:
The turbocharger compressor housing needs to be inspected on the products listed below. The existing turbocharger may have reduced life due to rust. You will not be charged for the service performed.
Contact your local Caterpillar dealer immediately to schedule this service. The dealer will advise you of the time required to complete this service.
Please refer the dealer to their Service Letter dated 19Nov2008 when scheduling this service.
We regret the inconvenience this may cause you, but urge you to have this service performed as soon as possible to prevent unscheduled downtime.
Caterpillar Inc.
Identification #(s)
Attached to 19Nov2008 Service Letter


Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.