AVSPARE.COM
parts catalog

TUBE AS 3598904 - Caterpillar



3598904 TUBE AS Caterpillar parts TUBE
Rating:
41
Alternative (cross code) number:
CA3598904
359-8904
3598904
Caterpillar 3598904 TUBE AS

Buy TUBE AS 3598904 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register

Information:


ACTION REQUIRED
If this work was performed under PI31568, no further action is required.
Remove the rocker arm shaft assemblies from the engine and disassemble them. Refer to the Disassembly & Assembly manual of the engine being inspected for removal and installation procedures for the valve mechanism cover, rocker arm shaft assembly, and rocker arm. Check the assembly for freedom of movement between the rocker arms and shaft. Visually inspect all parts for evidence of material transfer or scuffing between the rocker arm and shaft. Refer to Image1 for a photo of scuffing of a rocker arm, and Image2 for scuffing and material transfer of a rocker arm shaft.
Inspect the bolts for any damage to the threads or the underside of the bolt head. If damage is seen, replace the bolts. Lubricate the bolt heads prior to assembly.
If the rocker arms and shafts have no evidence of material transfer or scuffing damage, reassemble the rocker arm shaft assemblies and install them back in the engine. If there is evidence of damage on any of the parts, replace the entire rocker arm shaft assembly using the parts list below. Refer to the Disassembly & Assembly manual for proper procedures. Set valve lash for the inlet and exhaust valves and adjust the electronic unit injectors, per the Testing & Adjusting manual.
Image1
Image2
OWNER NOTIFICATION
U.S. and Canadian owners will receive the attached Owner Notification.
SERVICE CLAIM ALLOWANCES
Caterpillar Dealer Suggested Customer Suggested
Parts % Labor Hrs% Parts % Labor Hrs% Parts % Labor Hrs%
100% 100% 0% 0% 0% 0%
This is a 4.0-hour job
This Program is a direct replacement for the cancelled PI31568. If this work was performed under PI31568 enter note in SIMS entry stating work was performed under PI31568, and work under this program is not required.
PARTS DISPOSITION
Handle the parts in accordance with your Warranty Bulletin on warranty parts handling.
MAKE EVERY EFFORT TO COMPLETE THIS PROGRAM AS SOON AS POSSIBLE.
COPY OF OWNER NOTIFICATION FOR U.S. AND CANADIAN OWNERS
XYZ Corporation
3240 Arrow Drive
Anywhere, YZ 99999
PRIORITY - PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REPLACING ROCKER ARMS AND ROCKER ARM SHAFTS ON CERTAIN MARINE C32 ACERT ENGINES
MODELS INVOLVED - C32 ACERT Marine Engines
Dear Caterpillar Product Owner:
The rocker arm shaft assemblies need to be inspected on the products listed below. The existing rocker arm shaft may contain manufacturing debris from the supplier, which could cause the rocker arms to stick or seize to the rocker arm shaft. You will not be charged for the service performed.
Contact your local Caterpillar dealer immediately to schedule this service. The dealer will advise you of the time required to complete this service.
Please refer the dealer to their Service Letter dated 24Nov2008 when scheduling this service.
We regret the inconvenience this may cause you, but urge you to have this service performed as soon as possible to prevent unscheduled downtime.
Caterpillar Inc.
Identification #(s)
Attached to 24Nov2008 Service Letter


Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.