AVSPARE.COM
parts catalog

TUBE AS. 3599164 - Caterpillar



3599164 TUBE AS. Caterpillar parts TUBE
Rating:
76
Alternative (cross code) number:
CA3599164
359-9164
3599164
Caterpillar 3599164 TUBE AS.
Weight: 0.75 pounds 0 kg.

Buy TUBE AS. 3599164 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register

Information:


ACTION REQUIRED
Replace the existing exhaust riser support bracket.
Refer to the attached Rework Procedure for details.
SERVICE CLAIM ALLOWANCES
Product smu/age whichever comes first Caterpillar Dealer Suggested Customer Suggested
Parts % Labor Hrs% Parts % Labor Hrs% Parts % Labor Hrs%
0-5000 hrs,
0-24 mo 100.0% 100.0% 0.0% 0.0% 0.0% 0.0%
This is a 1.5-hour job
There is a $20 miscellaneous allowance for paint to match the engine.
PARTS DISPOSITION
Handle the parts in accordance with your Warranty Bulletin on warranty parts handling.
Rework Procedure
Step 1: Remove the 324-8080 Tube and 324-8082 Elbow to allow access to the 292-5811 Bracket located on the rear right hand side of the engine shown in Image1.1.1.
Step 2: Remove the 331-7034 Bracket and the 292-5811 Bracket shown in Image1.1.1.
Inspect and replace the 331-7034 Bracket with new part if required.
Image1.1.1
Step 3: Sub-assemble the 367-6241 Bracket to the 331-7034 Bracket with four 0L-1143 Bolts and four 9X-6458 Washers shown in Image1.2.1.
This system is sensitive to assembly torque. These bolts should only be tightened hand tight for sub-assembly.
Brackets must be sub-assembled prior to installation on engine.
Image1.2.1
Step 4: Install sub-assembly as shown in Image1.3.1. using six 9X-6458 Washers, two 0S-1588 Bolts (Items 1 and 2), two 0L-1352 Bolts (Items 3 and 4), and two 3B-1915 Bolts (Items 9 and 10).
This system is sensitive to assembly torque. All bolts should be assembled hand tight and then tightened to a final torque of 55 Nm (40.6 ft-lbs) in sequential order called out in Image1.3.1.
Image1.3.1
Step 5: Reinstall the 324-8080 Tube, 324-8082 Elbow, with a new 112-3540 O-ring, and a new 226-4753 Gasket.


Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.