AVSPARE.COM
parts catalog

TUBE AS 3599707 - Caterpillar



3599707 TUBE AS Caterpillar parts TUBE
Rating:
16
Alternative (cross code) number:
CA3599707
359-9707
3599707
Caterpillar 3599707 TUBE AS

Buy TUBE AS 3599707 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register

Information:

The engine room must be ventilated for two reasons:* To supply the engine with air for combustion.* To provide a flow of air through the engine room to prevent an excessive temperature build up, which may cause components such as the generator to overheat.In most applications in temperate climates, the engine will draw air from the engine room. If this is the case then, as a rough guide, it can be taken that every horsepower produced by the engines requires, as a minimum, 0.25 sq. ins. of vent area. If the boat is likely to be used in hot climates, an if engine room ventilation fans are fitted, then a vent area of 0.5 sq. ins. per horsepower should be provided, (see the table below). Wherever possible a flow of air through the engine room should be encouraged by using forward facing intake vents to take advantage of ram airflow, together with other vents to allow hot air to escape.With an effective ventilation system the engine air intake temperature will be no more than 10 Centigrade degrees higher than the outside air temperature.


Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.