AVSPARE.COM
parts catalog

TUBE AS-RH 4Z9331 - Caterpillar



4Z9331 TUBE AS-RH Caterpillar parts D11R TUBE
Rating:
57
Alternative (cross code) number:
CA4Z9331
4Z-9331
4Z9331
Caterpillar 4Z9331 TUBE AS-RH
Weight: 6 pounds 2 kg.

Buy TUBE AS-RH 4Z9331 Caterpillar genuine, new aftermarket tractor parts with delivery
TRACK-TYPE TRACTOR,

Compatible equipment models: 4Z9331:

TRACK-TYPE TRACTOR  D11R   Caterpillar
Number on catalog scheme: 22
 
  For full view, you need register

Information:


Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products.Dispose of all fluids according to local regulations and mandates.
Reference: For information about adding an extender to your cooling system, refer to Special Publication, SEBU6250, "Caterpillar Machine Fluids Recommendations", "Extended Life Coolant (ELC) Cooling System Maintenance" or consult your Caterpillar dealer.Flushing the ELC from the Cooling System
Some engines use Extended Life Coolant (ELC). If an ELC was previously used, flush the cooling system with clean water. No other cleaning agents are required.Flushing a Standard Coolant from the Cooling System
If you change to an ELC from another type of coolant, use a Caterpillar cleaning agent to flush the cooling system. After you drain the cooling system, thoroughly flush the cooling system with clean water. All of the cleaning agent must be removed from the cooling system.Draining and Flushing Procedure
Drain the coolant whenever the coolant is dirty or whenever foaming is observed.The radiator cap is positioned under the access door in the top of the hood.
Slowly loosen the radiator cap in order to relieve system pressure. Remove the radiator cap.
Illustration 1 g01588341
Locate the cover (1) on the bottom of the guard. Remove the cover (1) in order to gain access to the drain valve (2).
Open the drain valve (2). Allow the coolant to drain into a suitable container.
Close the drain valve. If you drained a standard coolant from the system proceed to Step 5. If you drained ELC from the system proceed to Step 7.
Fill the system with a solution which consists of clean water and of cooling system cleaner. The concentration of the cooling system cleaner should be 6 to 10 percent.
Start the engine. Run the engine for 90 minutes. Stop the engine. Drain the cleaning solution into a suitable container.
While the engine is stopped, flush the system with water. Flush the system until the draining water is clear.
Close the drain valve (2).
Replace the cover (1) for the drain valve (2).
Add the coolant solution. Reference: For coolant information, refer to Special Publication, SEBD0518, "Know Your Cooling System" and Operation and Maintenance Manual, "Capacities (Refill)".
Start the engine. Run the engine without the radiator cap until the thermostat opens and the coolant level stabilizes.
Check the coolant level. Make necessary adjustments to the coolant level.
If the gasket is damaged, replace the radiator cap. Install the radiator cap.
Stop the engine.

Caterpillar parts catalog:

Caterpillar parts catalog
D11R Custom Parts Manual Track-Type Tractor 8ZR00001-UP (MACHINE) POWERED BY 3508 Engine


Parts tube Caterpillar catalog:

7C7678 TUBE AS
3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B, 3516C, 5130, 5130B, 5230, 5230B, 776C, 776D, 777, 777B, 777C, 777D, 784B, 784C, 785, 785B, 785C, 785D, 789, 789B, 789C, 789D, 793, 793B, 793C, 793D...
7C7677 TUBE AS
3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B, 3516C, 5130, 5130B, 5230, 5230B, 776C, 776D, 777, 777B, 777C, 777D, 784B, 784C, 785, 785B, 785C, 785D, 789, 789B, 789C, 789D, 793, 793B, 793C, 793D...
8T6342 TUBE-HEAT SHRINK
120G, 16G, 3116, 3176, 325 L, 325 LN, 3406C, 3412, 3412C, 3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B, 3516C, 3606, 3608, 3612, 3616, 5130, 572R II, 621G, 621H, 621K, 623G, 623H, 623K, 623K LR...
1N3873 TUBE
3508, 3508B, 3512, 3512B, 3516, 3516B, 5130, 5130B, 5230, 5230B, 854G, 992G, D11N, D11R
1126054 TUBE AS
5130B, 776D, 777, 777B, 777C, 777D, 784C, 785, 785B, 785C, 854G, 992G, D11N, D11R
4W5461 TUBE AS
5130, 5130B, 776C, 776D, 777, 777B, 777C, 777D, 784B, 785, 785B, 854G, 992G, D11N, D11R
1797209 TUBE AS
D8R, D8R II, D8T
1111588 TUBE AS
D8R, D8R II, D9R, D9T
1105205 TUBE AS
D8R, D8R II, D9R, D9T
1081226 TUBE AS
D8R, D8R II, D8T, D9R, D9T
1081225 TUBE AS
D8R, D8R II, D8T, D9R, D9T
Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.