AVSPARE.COM
parts catalog

TUBE ASSY, LT EGR COOLER RETUR 7094089C1 - Caterpillar



7094089C1 TUBE ASSY, LT EGR COOLER RETUR Caterpillar parts TUBE
Rating:
21
Alternative (cross code) number:
CA7094089C1
70940-89C1
7094089C1
Caterpillar 7094089C1 TUBE ASSY, LT EGR COOLER RETUR

Buy TUBE ASSY, LT EGR COOLER RETUR 7094089C1 Caterpillar genuine, new aftermarket tractor parts with delivery

Number on catalog scheme: 1
 
  For full view, you need register

Information:


Illustration 15 g00925303
Install dowels (13) that align trunnion (3) with spacers (1). Install the spacers onto the trunnion.
Illustration 16 g00925301
Install trunnion (3) and spacers (1) onto the rear axle.
Illustration 17 g00925300
Use the pallet fork to carefully position the rear axle under the machine.
Illustration 18 g00925299
Attach the nylon lifting slings and Tooling (C) to the rear axle.
Use the attached lifting equipment to raise the rear axle off the pallet fork and toward the machine. Do not lift the rear axle all the way to the machine. Lift the rear axle to a position approximately 300 mm (12 inch) from the mounting position of the rear axle on the machine.
Remove the pallet fork and any cribbing that was used with the pallet fork from the machine.
Illustration 19 g00925123
Connect hose (7) to the rear axle.
Illustration 20 g00925122
Connect hose (8) to the rear axle.
Illustration 21 g00925115
Use the note that was made during the removal procedure to identify the path of harness (10) from the rear axle to electrical connector (12). Connect the harness to the electrical connector. Stow the harness in a suitable position to the frame of the machine.
Illustration 22 g00925112
Connect harness (9) from the rear axle at electrical connector (11) .
Illustration 23 g00925097
Install new cable straps in order to secure hose (7), hose (8), harness (9) and harness (10) together. Refer to the white arrows in Illustration 23 and to the note that was made during the removal procedure for the positions of the cable straps.
Use the attached lifting equipment to position the rear axle to the machine. Before raising the rear axle into position, ensure that the trunnions and the attached spacers are correctly oriented to the machine.
Illustration 24 g00925094
Install bolts (4) in order to secure trunnion (6) and spacer (5) to the machine at the rear of the rear axle. Tighten the bolts to a torque of 357 25 N m (260 20 lb ft).
Illustration 25 g00925093
Install bolts (2) in order to secure trunnion (3) and spacers (1) to the machine at the front of the rear axle. Tighten the bolts to a torque of 357 25 N m (260 20 lb ft).
Illustration 26 g00925087
Remove Tooling (C) and the nylon lifting slings from the rear axle and the machine.
Install the tire and rims to both ends of the rear axle. Refer to Disassembly and Assembly Manual, "Tire and Rim - Remove and Install".
Illustration 27 g00925084
The towing hitch is removed for photographic clarity.
Position Tooling (A) under the machine. For the position of the Tooling, refer to Illustration 27.
Use Tooling (A) to raise the machine in order to remove Tooling (B) and any cribbing from the machine.
Use Tooling (A) to lower the machine before removing the Tooling from the machine.End By:
Install the drive shaft. Refer to Disassembly and Assembly Manual, "Drive Shaft - Remove and Install".
Lubricate the two axle supports on the rear axle. Refer to Operation and Maintenance Manual, "Axle Support - Lubricate".

Caterpillar parts catalog:

Caterpillar parts catalog
CT13 SCR ON HIGHWAY TRUCK ENGINE JFB00001-UP
CT13 ON HIGHWAY TRUCK ENGINE KBK00001-UP


Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.