AVSPARE.COM
parts catalog

TUBE A. 7B0195 - Caterpillar



7B0195 TUBE A. Caterpillar parts TUBE
Rating:
11
Alternative (cross code) number:
CA7B0195
7B-0195
7B0195
Caterpillar 7B0195 TUBE A.

Buy TUBE A. 7B0195 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register

Information:

Procedure to Install the 5P-9119 Sealant (Adhesive Backed)
Illustration 1 g01211336
(1) Flange (2) Sealant
Visually inspect the face of the flange for nicks or scratches. If nicks or scratches are found, grind the face of the flange smooth.
Install the sealant. When possible, the portion of the sealant that is crossed should be located on a side of the tank that will be above the fluid level. Refer to Illustration 1.
Illustration 2 g01211378
Install the sealant so that the outer edge of the sealant is contacting the bolt holes, but not intersecting the bolt holes. Refer to Illustration 2.
Position the ends of the sealant so that the ends are crossed. Refer to Illustration 2.
Tighten two bolts and nuts on both sides of all four corners.
Tighten all of the bolts and nuts around the tank.Note: Tighten the two bolts and nuts on both sides of all four corners again.Note: Tighten the bolts and nuts that are directly over the joint at location (A) again.


Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.