AVSPARE.COM
parts catalog

TUBE AS 9V9836 - Caterpillar



9V9836 TUBE AS Caterpillar parts IT28 TUBE
Rating:
75
Alternative (cross code) number:
CA9V9836
9V-9836
9V9836
Caterpillar 9V9836 TUBE AS
Weight: 0.20 pounds 0 kg.

Buy TUBE AS 9V9836 Caterpillar genuine, new aftermarket tractor parts with delivery
INTEGRATED TOOLCARRIER,

Compatible equipment models: 9V9836:

INTEGRATED TOOLCARRIER  IT28   Caterpillar
Number on catalog scheme: 7
 
  For full view, you need register

Information:


This is a 4.0-hour job
PARTS DISPOSITION
Handle the parts in accordance with your Warranty Bulletin on warranty parts handling.
Rework Procedure
Fan Pulley Adaptor Steel Tube Rework Procedure:
The top adaptor and steel tube supplying the oil to the fan to reverse the blades may contact the smaller diameter pulley. If this is the case, then perform the following Rework Steps. Refer to Image1.1.1.
Image1.1.1
1. Remove the 278-7531 Steel Tube from the top 148-8385 Adaptor and the 276-5394 Hose.
2. Leave the 164-5570 Adaptor in the hose and fit a new 278-7530 Tube Assembly. The 148-8385 Adaptor and the new 278-7530 Tube Assembly will need to be orientated in order to give clearance between the engine and pulley. Refer to Image1.2.1, 1.2.2, and 1.2.3.
The tightening specification for the adaptor to the engine is 20 +/- 2 N.m.
The tightening specification for the tube to the adaptor is 15 +/- 2 N.m.
Image1.2.1
Image1.2.2
Image1.2.3
3. Remove the tube 5K-2298 Clip that secures the two original tubes to the engine.
4. Clamp the existing tube with a 8M-2772 Clip.
5. Tighten the existing bolt to a specified torque of 55 +/- 10 N.m.
6. Secure the new tube by removing the engine cover bolt. Refer to Image1.3.1. Reuse the bolt in order to secure the new tube using a 8M-2772 Loop Clip.
7. Add an 8T-4224 Washer under the bolt head and a second 8T-4224 Washer between the clip and engine. Tighten the bolt to a specified torque of 55 +/- 10 N.m.
Image1.3.1
8. Reroute the 276-5394 Supply Hose as follows. Remove the hose from the bracket in the frame.
9. The two supply hoses are clipped with a 5K-5338 Hose Clip. Remove this clip. The 5K-5338 Hose Clip will not be reused. Reinstall the bottom hose with a new 067-2551 Clip.
10. Tighten the existing bolt to a specified torque of 55 +/- 10 N.m.
Refer to Image1.4.1.
Image1.4.1
11. Reroute the removed 276-5394 Hose and secure the hose to the steel tube, using a new 200-7345 Swivel Mount and three new 204-2281 Cable Straps. Refer to Image1.5.1.
Image1.5.1
12. Attach the rerouted 276-5394 Hose to the new steel 278-7530 Tube Assembly. Tighten to a specified torque of 25 +/- 2 N.m. Refer to image1.6.1.
Image1.6.1
13. Recheck clearances before starting the machine.

Caterpillar parts catalog:

Caterpillar parts catalog
IT28 INTEGRATED TOOLCARRIER 8JB00001-UP (MACHINE) POWERED BY 3204 ENGINE
IT28 INTEGRATED TOOLCARRIER 2KC00001-UP (MACHINE) POWERED BY 3204 ENGINE
IT28B INTEGRATED TOOLCARRIER 1HF00001-UP (MACHINE) POWERED BY 3204 ENGINE
IT28 INTEGRATED TOOLCARRIER 8JB00001-UP (MACHINE) POWERED BY 3204 ENGINE
IT28 INTEGRATED TOOLCARRIER 2KC00001-UP (MACHINE) POWERED BY 3204 ENGINE
IT28B INTEGRATED TOOLCARRIER 1HF00001-UP (MACHINE) POWERED BY 3204 ENGINE
IT28B INTEGRATED TOOLCARRIER 5SD00001-UP (MACHINE) POWERED BY 3204 ENGINE
IT28 INTEGRATED TOOLCARRIER 8JB00001-UP (MACHINE) POWERED BY 3204 ENGINE


Parts tube Caterpillar catalog:

5P0078 TUBE
3204, 3408, 416D, 416E, 420D, 420E, 424D, 428D, 430E, 432D, 442D, 936F, D6N, D9L, IT28, R3000H
3V0036 TUBE AS
814B, 815B, 816B, 824C, 825C, 826C, 916, 926, 936, 936F, 950B, 950B/950E, 950F, 966D, 966F, 980C, 980F, 980F II, G936, IT18B, IT28, IT28B
2V7990 TUBE AS
814B, 815B, 826C, 916, 926, 936, 936F, 950B, 950F, 950F II, 966D, 966F, 980C, 980F, CS-643, G936, IT18, IT18B, IT28, IT28B
8V8009 TUBE AS.
926, 926A, G926, IT28, IT28B
2W8981 TUBE AS.
916, 926, IT28
7V1640 TUBE AS
926, IT28, IT28B
9V7423 TUBE
916, 926, G926, IT28
6W3382 TUBE AS
926, IT28, IT28B
9V7746 TUBE AS
926, IT28, IT28B
3V6908 TUBE AS
916, 926, 926A, 980C, 980G, 988B, 992C, G916, G926
5V1409 TUBE AS
936, 936F, 950B, 950B/950E, 966D, G936
Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.