AVSPARE.COM
parts catalog

TUBE AS 9V9870 - Caterpillar



9V9870 TUBE AS Caterpillar parts 824C TUBE
Rating:
17
Alternative (cross code) number:
CA9V9870
9V-9870
9V9870
Caterpillar 9V9870 TUBE AS
Weight: 6 pounds 3 kg.

Buy TUBE AS 9V9870 Caterpillar genuine, new aftermarket tractor parts with delivery
WHEEL DOZER,

Compatible equipment models: 9V9870:

WHEEL DOZER  824C   Caterpillar
Number on catalog scheme: 30
 
  For full view, you need register

Information:


Improper lifting and improper tie-downs can allow the load to shift or fail and cause injury or damage. Use only properly rated cables and slings with lift and tie down points provided.Follow the instructions in Operation and Maintenance Manual, "Lifting and Tying Down the Machine" for the proper technique for securing the machine. Refer to Operation and Maintenance Manual, "Specifications" for specific weight information.
Illustration 1 g02537822
Improper lifting or tie-downs can allow the load to shift and cause injury or damage. Install the steering frame lock link before lifting.
Ensure that the lift arms are in the fully lowered position before lifting the machine.Check all of the laws that govern the load characteristics (height, weight, width, and length).ReferenceFor shipping instructions, refer to Operation and Maintenance Manual, "Shipping the Machine".Lifting the Machine
Note: Do not use handles or steps to lift the machine. Do not use the work tool for a lifting point.Note: The machine shipping weight that is listed is the weight of the most common configuration of the machine. If attachments have been installed on your machine, the weight of your machine and the center of gravity of your machine may vary.ReferenceRefer to Operation and Maintenance Manual, "Specifications" for the dimensions and weight of the machine.
Illustration 2 g02889818
The lifting eyes are identified by a label that shows a hook.
Lifting Point - In order to lift the machine, attach the lifting devices to the lifting points. Use properly rated cables and properly rated slings to lift the machine.Position the crane or the lifting device in order to lift the machine in a level position.The width of the spreader bar must be sufficient to prevent the lifting cables or the lifting straps from contacting the machine.Do not allow any personnel in the area around the machine.Remove the tread plate above the lifting hole on each side of the machine. Raise the hood to access all of the bolts.If your machine is equipped with roading fenders, swing the fenders out of the way while hooking the lifting device.
Engage the parking brake before you sling the machine and before you secure the machine with tie-downs.
Install the frame lock pin prior to lifting the machine.
Attach two lifting cables to the rear of the machine. There is one lifting eye on each side of the rear of the machine.
Attach two lifting cables to the front of the machine. There is one eye on each side of the front of the machine.
Connect the four lifting cables to the spreader bars. The spreader bars must be centered over the machine.
If equipped, secure any attachments.
Lift the machine. Move the machine to the desired position.
When the machine is positioned, place the blocks behind the tires.Tying Down the Machine
Note: Do not use handles or steps to tie

Caterpillar parts catalog:

Caterpillar parts catalog
824C TRACTOR 85X01194-UP (MACHINE) POWERED BY 3406 ENGINE


Parts tube Caterpillar catalog:

7X2049 TUBE AS-REFRIGERANT ORIFICE
120H, 120H ES, 120H NA, 12H, 12H ES, 12H NA, 135H, 135H NA, 140H, 140H ES, 140H NA, 143H, 14H, 14H NA, 160H, 160H ES, 160H NA, 163H, 163H NA, 16H, 307B, 317B LN, 318B, 322B L, 325B L, 330B L, 345B, 34...
1152359 TUBE AS
3406B, 3406C, 3406E, 3456, 770, 770G, 770G OEM, 824C, 824G, 824G II, 824H, 824K, 825G II, 825H, 825K, 826G II, 826H, 826K, 980G, 980G II, 980H, 986H, AD55, C-15, C-16, C-18, C15, C16, C18, CX31-C15I, ...
2773076 TUBE AS-OIL JET
3406B, 3406C, 3406E, 3456, 375, 375 L, 385B, 5080, 5090B, 578, 583R, 621G, 623G, 627F, 627G, 651B, 657B, 735, 740, 824C, 824G, 824G II, 825G, 825G II, 826C, 826G, 826G II, 834G, 836G, 980C, 980G, 980G...
4S8603 TUBE AS-SCREEN
14G, 16G, 24H, 3192, 515, 525, 525B, 611, 613C, 613C II, 613G, 615, 615C, 65, 69D, 7211, 7231, 7241, 7251, 7261, 7271, 769C, 769D, 771C, 771D, 773B, 773D, 773E, 773F, 775B, 775D, 775E, 775F, 776, 777,...
2W2927 TUBE AS
3406B, 3406C, 578, 824C, 826C, 980C, 980F, 980F II, D8N, HT400, PM-465, RM-250C, RM-350B, RR-250, RR-250B, SM-350, SS-250
2764637 TUBE AS-OIL JET
365C, 365C L, 365C L MH, 374D L, 374F L, 583T, 587T, 621B, 621G, 623G, 627F, 627G, 631D, 637D, 651B, 657E, 657G, 735, 735B, 740, 740B, 770, 770G, 770G OEM, 824C, 824H, 824K, 825H, 825K, 826H, 826K, 98...
5G2514 TUBE
814B, 814F, 814F II, 815B, 815F, 815F II, 816B, 816F, 816F II, 824C, 824G II, 824H, 824K, 825C, 825G II, 825H, 825K, 826G II, 826H, 826K, 834H, 836H, 836K, 910, 936F, 938F, 950B, 950B/950E, 950F, 950F...
3V0036 TUBE AS
814B, 815B, 816B, 824C, 825C, 826C, 916, 926, 936, 936F, 950B, 950B/950E, 950F, 966D, 966F, 980C, 980F, 980F II, G936, IT18B, IT28, IT28B
6N9747 TUBE AS
824C, 826C, 980C, 980F, 980F II
4V4331 TUBE
824C, 826C, 980C
2V4993 TUBE AS
824C, 980C, 980F
9V6120 TUBE AS
824C, 826C, 980C
Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.