TUBE AS 9V9887 - Caterpillar

Hydraulic Activation Control
Hydraulic Functions Disengaged - Move all controls to the HOLD position. Move the lever back to the locked position. Hydraulic Functions Engaged - Move the lever forward to the unlocked position.Travel Activation Control
Travel Lever Lock Functions Engaged - Move all controls to the HOLD position. Move the lever back to the locked position. Machine should not move. Travel Lever Lock Functions Disengaged - Move the lever forward to the unlocked position. Machine can now move.Swing and Stick Control
The following hydraulic control levers can be changed to three other patterns by repositioning the control rods. See your Caterpillar dealer for the procedure. Stick Out (1.) - Move the lever forward to move the stick out. Swing Right (2.) - Move the lever to the right to swing the upper structure to the right. Stick In (3.) - Move the lever to the rear to move the stick in. Swing Left (4.) - Move the lever to the left to swing the upper structure to the left. Hold (5.) - When the lever is released from any position, the lever will return to HOLD. Stick and swing movement should stop.Stick and swing functions may be performed at the same time. For example, to move the stick out and swing right at the same time, move the lever forward and to the right.Bucket and Boom Control
Boom Lower (1.) - Move the lever forward to lower the boom. Bucket Dump (2.) - Move the lever to the right to dump the bucket. Boom Raise (3.) - Move the lever back to raise the boom. Bucket Close (4.) - Move the lever to the left to close the