1695452 U-BOLT Caterpillar parts 966K, 966M, 966M XE, 972K, 972M, 972M XE, D8R II, SPF343, SPF343C U
Rating:
Alternative (cross code) number:
CA1695452
169-5452
1695452
CA1695452
169-5452
1695452
Weight: 0.26 pounds 0 kg.
Information:
DIAMETER
8.9
mm
HEIGHT
101.6
mm
MATERIAL
Steel - Carbon - 140 MPa Min Yield Strength
NUMBER OF BENDS
1
THREAD LENGTH
0000030.0000
mm
THREAD SIZE
.38-16
WIDTH
92
WIDTH BETWEEN CENTERLINE THREAD
101.5
PUMPER, WHEEL LOADER,
Compatible equipment models: 1695452:
Number on catalog scheme:
19
For full view, you need register
Information:
Introduction
The problem that is identified below does not have a known permanent solution. Until a permanent solution is known, use the solution that is identified below.Problem
Some of the machines listed above may experience slow or inoperable telescoping cylinder operation during retraction.Solution
Illustration 1 g06310753
Counterbalance valve
The cause of this failure has been attributed to an incorrectly adjusted or sticking counterbalance valve.If a problem occurs, replace the valve with the same part number, 459-6895. Do not try to adjust the valve. Provide information about the failure through the CPI Feedback tool in the Service Information Management System (SIMSi). Reference CPI number 359608. The link to SIMS can be found through the Caterpillar Service Information System (SIS). Retain failed parts and check Send It Back (SIB) for open requests.
The problem that is identified below does not have a known permanent solution. Until a permanent solution is known, use the solution that is identified below.Problem
Some of the machines listed above may experience slow or inoperable telescoping cylinder operation during retraction.Solution
Illustration 1 g06310753
Counterbalance valve
The cause of this failure has been attributed to an incorrectly adjusted or sticking counterbalance valve.If a problem occurs, replace the valve with the same part number, 459-6895. Do not try to adjust the valve. Provide information about the failure through the CPI Feedback tool in the Service Information Management System (SIMSi). Reference CPI number 359608. The link to SIMS can be found through the Caterpillar Service Information System (SIS). Retain failed parts and check Send It Back (SIB) for open requests.