AVSPARE.COM
parts catalog

VALVE AR- 3157105 - Caterpillar



3157105 VALVE AR- Caterpillar parts VALVE
Rating:
71
Alternative (cross code) number:
CA3157105
315-7105
3157105
Caterpillar 3157105 VALVE AR-

Buy VALVE AR- 3157105 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register

Information:

Removal Procedure
Table 1
Required Tools    
Tool    Part Number    Part Description    Qty    
A     8S-7641     Tubes     2    
4C-6486 Stands     2    
Personal injury or death can result from sudden machine movement.Sudden movement of the machine can cause injury to persons on or near the machine.To prevent injury or death, make sure that the area around the machine is clear of personnel and obstructions before operating the machine.
Note: The following procedure requires two people.
Start the engine.
Park the machine on a flat, level surface.
Illustration 1 g03139836
Turn switch (1) to the right to enable the rear of the machine to be raised up to the service height position. In the service height position, the rear leg locks can be lowered down and locked into position for servicing the machine.
Illustration 2 g03139837
Place service supports (2) into position. Lower the machine onto service supports (2) .
Engage the parking brake.
Illustration 3 g02480476
Remove the nut and work light connector (3) from both sides of the machine.
Illustration 4 g02480477
Locate ground level control station (4) at the rear of the machine.
Illustration 5 g02480496
(5) Switch to raise and lower the left front of the machine. (6) Switch to raise and lower the right front of the machine. (7) Switch to raise and lower the rear of the machine.
Use switches (5) and (6) to raise the front machine.
When working on the rear track assemblies, use switch (7) to raise and lower the rear of the machine.
Illustration 6 g02480497
Place Tooling (A) under the machine frame.
Illustration 7 g02480496
Use switches (5) and (6) to lower the machine onto Tooling (A) .
Illustration 8 g01449940
Press switch (5) down while lifting the track assembly with a suitable lifting device. The track assembly weighs approximately 1000 kg (2204 lb).
Raise the track assembly 400 mm (16 inch) off the ground.
Illustration 9 g02480499
Install a suitable chain to hold the track assembly in the air. Remove the suitable lifting device.
Illustration 10 g02480500
Loosen the fitting (8) .Note: Do not exceed three full turns.
Illustration 11 g02480501
Remove four bolts (10) and track roller (9) .


Parts valve Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.