AVSPARE.COM
parts catalog

VALVE GP 3599571 - Caterpillar



3599571 VALVE GP Caterpillar parts VALVE
Rating:
26
Alternative (cross code) number:
CA3599571
359-9571
3599571
Caterpillar 3599571 VALVE GP
Weight: 150 pounds 68 kg.

Buy VALVE GP 3599571 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register

Information:

1. Loosen clamp (1) on hose (2). 2. Remove four bolts (3) that hold the elbow the aftercooler. 3. Disconnect oil line (4) from the engine block. 4. Remove the two bolts that hold the two clips (5) from oil line (4) against shield assembly (6). 5. Remove the two bolts that hold oil line (4) to the top of the turbocharger. Remove oil line (4) and the gasket between the oil line and the turbocharger.6. Remove the two bolts that hold oil line (7) to the bottom of the turbocharger. 7. Fasten a hoist to the turbocharger, as shown. Remove the nuts that hold the turbocharger. Remove turbocharger (8). The weight of the turbocharger and elbows is approximately 43 kg (95 lb).8. Remove elbow (9) from the turbocharger. Remove coupling (10) and elbow (11) from the turbocharger as a unit.Install Turbocharger (Engines With One Turbocharger)
1. Make sure the two O-ring seals are in position on the end of elbow (1). Put engine oil or glycerine on each seal. Install elbow (1) on turbocharger (2).2. Make sure the ring is in position on the end of coupling (3). Install coupling (3) and elbow (4) on the turbocharger as a unit. 3. Fasten a hoist to the turbocharger, as shown. Make sure gasket (6) is in position on the manifold. Install turbocharger (2) on the engine.4. Put 5P3931 Anti-Seize Compound on the threads of all the bolts that hold the turbocharger and support in place. Install the nuts and bolts that hold the turbocharger and support (50) in position on the manifold. 5. Make sure the gasket is in position between the turbocharger and oil line (8). Connect oil line (8) to the turbocharger.6. Install oil line (7) and the gasket on the top of the turbocharger. 7. Connect the bottom of oil line (7) to the engine block. 8. Install the two nuts and bolts that hold two clips (8) on oil line (7) to sheild assembly (9). 9. Make sure the gasket is in position between elbow (11) and the aftercooler. Install four bolts (10) to hold elbow (11) to the aftercooler. 10. Tighten clamp (12) that holds hose (13) to the turbocharger.


Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.