3599599 VALVE GP Caterpillar parts VALVE
Rating:
Alternative (cross code) number:
CA3599599
359-9599
3599599
CA3599599
359-9599
3599599
Weight: 82 pounds 37 kg.
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
New Turbo Cartridge CHRA 4027065 for Cummins HX30, HX30W 2835399, 4039338, 4039339 3592312, 3592311, 3598047, 3598048, 3599240, 3599253, 3599065, 3599599, 3599600, 3599064
TKParts Application : For Cummins Various DFM HOLSET HX30 Turbos: 2835399, 4039338, 4039339 HOLSET HX30W Turbos: 3592312, 3592311, 3598047, 3598048, 3599240, 3599253, 3599065, 3599599, 3599600, 3599064
TKParts Application : For Cummins Various DFM HOLSET HX30 Turbos: 2835399, 4039338, 4039339 HOLSET HX30W Turbos: 3592312, 3592311, 3598047, 3598048, 3599240, 3599253, 3599065, 3599599, 3599600, 3599064
For full view, you need register
Information:
1. Drain the coolant from the cooling system to a level below that of the water pump.2. Remove elbow (1).3. Remove bolts (4) that hold cover (2) to the water pump. Remove bolts (5) that hold elbow (3) to cover (2).4. Remove line (6).5. Remove cover (2). Remove elbow (3). 6. Remove four bolts (7).7. Remove nuts (8) and one bolt (not shown). Remove water pump.Install Water Pump
1. Put the water pump in position on the timing gear cover. Install nuts (8) and one bolt that hold the pump to the timing gear cover.2. Install four bolts (7). 3. Put clean engine oil or glycerin on O-ring seals (9). Install elbow (3). 4. Put cover (2) in position on the water pump. Install bolts (4) that hold the cover to the water pump and bolts (5) that hold elbow (3) to the cover.5. Install elbow (1).6. Install line (6).7. Refill the cooling system to the proper level. See "Coolant Recommendations" in the Operation and Maintenance Manual.Disassemble Water Pump
Start By:a. remove water pump 1. Remove O-ring seal (1) from adapter (2).2. Remove adapter (2) with a screwdriver. Remove the seal from the edge of adapter (2).3. Remove bolt (3) and washer. 4. Remove impeller (4) from the water pump housing with tooling (A). 5. Remove seal assembly (5). Remove ring and seal (6). 6. Remove the
1. Put the water pump in position on the timing gear cover. Install nuts (8) and one bolt that hold the pump to the timing gear cover.2. Install four bolts (7). 3. Put clean engine oil or glycerin on O-ring seals (9). Install elbow (3). 4. Put cover (2) in position on the water pump. Install bolts (4) that hold the cover to the water pump and bolts (5) that hold elbow (3) to the cover.5. Install elbow (1).6. Install line (6).7. Refill the cooling system to the proper level. See "Coolant Recommendations" in the Operation and Maintenance Manual.Disassemble Water Pump
Start By:a. remove water pump 1. Remove O-ring seal (1) from adapter (2).2. Remove adapter (2) with a screwdriver. Remove the seal from the edge of adapter (2).3. Remove bolt (3) and washer. 4. Remove impeller (4) from the water pump housing with tooling (A). 5. Remove seal assembly (5). Remove ring and seal (6). 6. Remove the