AVSPARE.COM
parts catalog

VALVE ASSY, EGR (Reference) 7096108C94 - Caterpillar



7096108C94 VALVE ASSY, EGR (Reference) Caterpillar parts VALVE
Rating:
26
Alternative (cross code) number:
CA7096108C94
709610-8C94
7096108C94
Caterpillar 7096108C94 VALVE ASSY, EGR (Reference)

Buy VALVE ASSY, EGR (Reference) 7096108C94 Caterpillar genuine, new aftermarket tractor parts with delivery

Number on catalog scheme: 881
 
  For full view, you need register

Information:

Removal Procedure
Start By:
Release the hydraulic system pressure. Refer to Disassembly and Assembly, "Hydraulic System Pressure - Release" for the correct procedure.
Cylinders equipped with lock valves can remain pressurized for very long periods of time, even with the hoses removed.Failure to relieve pressure before removing a lock valve or disassembling a cylinder can result in personal injury or death.Ensure all pressure is relieved before removing a lock valve or disassembling a cylinder.
Personal injury can result from hydraulic oil pressure and hot oil.Hydraulic oil pressure can remain in the hydraulic system after the engine has been stopped. Serious injury can be caused if this pressure is not released before any service is done on the hydraulic system.Make sure all of the work tools have been lowered to the ground, and the oil is cool before removing any components or lines. Remove the oil filler cap only when the engine is stopped, and the filler cap is cool enough to touch with your bare hand.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g00927952
Release the hydraulic pressure from the cylinder. Refer to Disassembly and Assembly, "Hydraulic System Pressure - Release" for the correct procedure.
Remove four bolts (2) and the washers in order to remove lock valve (1) from boom cylinder (3) .
Remove three O-ring seals from the mating face of lock valve (1) (not shown).Installation Procedure
Clean all parts and inspect all parts. If any parts are worn or damaged, use new Caterpillar parts for replacement.
Illustration 2 g00927952
Install three O-ring seals into the mating face of lock valve (1) (not shown).
Position lock valve (1) onto boom cylinder (3) and install four bolts (2) with the washers.

Caterpillar SIS machinery equipment:

Caterpillar SIS

Caterpillar parts catalog:

Caterpillar parts catalog
CT13 SCR ON HIGHWAY TRUCK ENGINE JFB00001-UP
CT13 ON HIGHWAY TRUCK ENGINE KBK00001-UP
CT13 SCR ON HIGHWAY TRUCK ENGINE JFB00001-UP
CT13 ON HIGHWAY TRUCK ENGINE KBK00001-UP


Parts valve Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.