4416195 WALKWAY AS Caterpillar parts
SE60 V XW
Rating:
Alternative (cross code) number:
CA4416195
441-6195
4416195
CA4416195
441-6195
4416195
Weight: 14 pounds 6 kg.
ASPHALT SCREED,
Compatible equipment models: 4416195:
Number on catalog scheme:
9
For full view, you need register
Information:
AFFECTED PRODUCT
Model Identification Number
336E L H RZA00184, 189-191, 193, 195-196, 201-203, 213
PARTS NEEDED
Qty
Part Number Description
8 8T4184 BOLT-HEX HEAD
In order to allow equitable parts availability to all participating dealers, please limit your initial parts order to not exceed 36% of dealership population. This is an initial order recommendation only, and the ultimate responsibility for ordering the total number of parts needed to satisfy the program lies with the dealer.
ACTION REQUIRED
Refer to the attached Rework Procedure.
OWNER NOTIFICATION
Owners in the following countries will receive the attached Owner Notification:
US
Canada
SERVICE CLAIM ALLOWANCES
Caterpillar Dealer Suggested Customer Suggested
Parts % Labor Hrs% Parts % Labor Hrs% Parts % Labor Hrs%
100% 100% 0% 0% 0% 0%
This is a 0.5-hour job
PARTS DISPOSITION
Handle the parts in accordance with your Warranty Bulletin on warranty parts handling.
MAKE EVERY EFFORT TO COMPLETE THIS PROGRAM AS SOON AS POSSIBLE.
EXAMPLE COPY OF OWNER NOTIFICATION
XYZ Corporation
3240 Arrow Drive
Anywhere, YZ 99999
PRIORITY - PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE SIDE BRANCH HOSE BOLTS
MODELS INVOLVED - CERTAIN 336ELH EXCAVATORS
Dear Cat Product Owner:
The side branch bolts needs to be replaced on the products listed below. The existing bolt can cause an oil leak. You will not be charged for the service performed.
Contact your local Cat dealer immediately to schedule this service. The dealer will advise you of the time required to complete this service.
If you are no longer the owner of this product(s), please contact your local Cat dealer so that our records can be updated.
Please refer the dealer to their Service Letter dated 14Aug2013 when scheduling this service.
We regret the inconvenience this may cause you, but urge you to have this service performed as soon as possible to prevent unscheduled downtime.
Caterpillar Inc.
Identification #(s)
Attached to 14Aug2013 Service Letter
Rework Procedure
1. Remove each 8T-4194 Bolt one at at a time and replace with a new 8T-4184 Bolt. Refer to Image1.1.1.
Note: The bolts must be replaced one at a time in order to prevent oil from leaking.
Image1.1.1
2. Install the remaining seven bolts one at a time. Tighten the eight 8T-4184 Bolts to a specified torque of 100 N.m.