AVSPARE.COM
parts catalog

WASHER 0005597 - Caterpillar



0005597 WASHER Caterpillar parts WASHER
Rating:
81
Alternative (cross code) number:
CA0005597
000-5597
0005597
Caterpillar 0005597 WASHER
Weight: 0.010 pounds 0 kg.

Buy WASHER 0005597 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register

Information:

Installation Procedure
Table 1
Required Tools    
Tool    Part Number    Part Description    Qty    
A     1U-9759     Jack Stand Gp     2    
B     183-4795     Roller Lifting Fork As     1    
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g01049715
Use a suitable lifting device in order to position Tooling (B) and track roller assembly (6) under the track roller frame. The weight of track roller assembly (6) is approximately 35 kg (75 lb).
Install bolts (5) and the washers.Note: Refer to Table 2 for torque specification for bolts (5) .
Table 2
BOLT SIZE     TORQUE SPECIFICATION    
M12    
120 20 N m (89 15 lb ft)    
M16    
270 40 N m (199 30 lb ft)    
Illustration 2 g00832664
Remove the wood blocks and Tooling (A) .
Personal injury or death can result from grease under pressure.Grease coming out of the relief valve under pressure can penetrate the body causing injury or death.Do not watch the relief valve to see if grease is escaping. Watch the track or track adjustment cylinder to see if the track is being loosened.Loosen the relief valve one turn only.If track does not loosen, close the relief valve and contact your Caterpillar dealer.
Adjust the track. Refer to Operation and Maintenance Manual, "Track - Check/ Adjust".
Illustration 3 g00832644
Tighten relief valve (3) and fill valve (4) to 34 7 N m (25 5 lb ft).
Illustration 4 g01049061
Install cover (2) . Secure cover (2) with bolts (1) .


Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.