AVSPARE.COM
parts catalog

WEIGHT 0005609 - Caterpillar



0005609 WEIGHT Caterpillar parts WEIGHT
Rating:
31
Alternative (cross code) number:
CA0005609
000-5609
0005609
Caterpillar 0005609 WEIGHT
Weight: 0.010 pounds 0 kg.

Buy WEIGHT 0005609 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register

Information:


Illustration 6 g01049876
Disconnect heater hose (19) on the right side of the engine. Disconnect harness assemblies (20) from the alternator.
Illustration 7 g01050010
Remove floor mat (21) and footrest (22) .
Illustration 8 g01050011
Remove floor panel (23) .
Illustration 9 g01050012
Remove bolts (25) and air ducting (24) .
Illustration 10 g01049929
Right side of the engineNote: The floor panel in the cab is removed in order to disconnect one end of tube assembly (28). Refer to Step 17 through Step 19.
Remove clamp (26) that secures tube assembly (28). Disconnect the fittings and remove tube assembly (28) .
Disconnect cable assembly (29) from the starter motor. Remove nut (30) and disconnect cable assembly (28 A) and cable assembly (31A). Disconnect nut (31). Cut all cable straps that secure harness assembly (27) to the engine and move harness assembly (27) out of the way.
Disconnect hose assembly (32) from the implement pump.
Illustration 11 g01049168
Disconnect the other end of fuel hose assembly (13) and remove fuel hose assembly (13) from the machine.
Disconnect harness assembly (34) and harness assembly (35). Remove clip (33) and all the hardware that secures harness assembly (27) to the engine. Cut all cable straps that secure harness assembly (27) to the engine and move harness assembly (27) out of the way.
Illustration 12 g01050046
Remove bolts and radiator shroud (36) .
Illustration 13 g01050047
Remove cover (37) from the middle bottom guard.
Illustration 14 g00815318
Use Tooling (A) and a suitable lifting device to support the engine. The weight of the engine is approximately 470 kg (1030 lb).
Illustration 15 g01050048
Disconnect clamps (38) that secure harness assembly (27). Cut all cable straps that secure harness assembly (27) to the engine. Remove all remaining hardware that secures harness assembly (27) to the engine and move harness assembly (27) out of the way.
Remove clamp (39) that secures decelerator cable (16) to the flywheel housing. Move decelerator cable (16) out of the way. Remove remaining bolts (40) from the flywheel housing.
Illustration 16 g01050053
Remove front motor mount (41) on the right side of the engine. Repeat Step 30 for the front motor mount on the left side of the engine.
Illustration 17 g00815409
Remove engine (42) from the machine. Mount engine (42) on Tooling (B) with four appropriate mounting arms.


Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.