AVSPARE.COM
parts catalog

WHEEL SAW AR 2278130 - Caterpillar



2278130 WHEEL SAW AR Caterpillar parts SW60 WHEEL
Rating:
79
Alternative (cross code) number:
CA2278130
227-8130
2278130
Caterpillar 2278130 WHEEL SAW AR
Weight: 1820 pounds 825 kg.

Buy WHEEL SAW AR 2278130 Caterpillar genuine, new aftermarket tractor parts with delivery
WHEEL SAW,

Compatible equipment models: 2278130:

WHEEL SAW  SW60   Caterpillar
Number on catalog scheme:
 
  For full view, you need register

Information:


Illustration 1 g00295187
Follow all of the steps in this procedure to obtain a usable oil pressure reading.
Be sure that the engine is filled to the correct level with SAE 10W-30 oil. The engine oil pressure graph will not be accurate if incorrect viscosity oil is used.
Remove the oil pressure switch. Connect the 1U-5470 Engine Pressure Group to the main oil manifold. Use the connection at the oil pressure switch location (1) .
Run the engine. Allow the engine oil temperature to rise to 99°C (210°F).Note: A 3°C (5°F) increase in engine oil temperature gives a 7 kPa (1 psi) decrease in engine oil pressure.Note: Make sure that the engine oil does not rise above a temperature of 115°C (239°F).
Keep the engine oil temperature consistent with the engine at the engine's rated rpm and read the pressure gauge.
Use the engine rpm and the oil pressure to locate an intersection on the engine oil pressure graph.
Illustration 2 g00292588
The results should fall within the acceptable area of the graph. If the results are not acceptable, find the cause of the problem and correct the problem. Engine failure or a reduction in engine life can be the result of continued operation with oil pressure that is outside of the acceptable range.Note: Keep a record of engine oil pressure at regular intervals. The records can indicate possible engine problems or damage. A sudden increase or a sudden decrease of 70 kPa (10 psi) in oil pressure should be inspected, even within the acceptable range of the engine oil pressure graph.

Caterpillar SIS machinery equipment:

Caterpillar SIS


Parts wheel Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.