parts catalog

WHEEL AS-MEASURING 4416004 - Caterpillar

4416004 WHEEL AS-MEASURING Caterpillar parts SAT318
Alternative (cross code) number:
Caterpillar 4416004 WHEEL AS-MEASURING

Buy WHEEL AS-MEASURING 4416004 Caterpillar genuine, new aftermarket tractor parts with delivery

Compatible equipment models: 4416004:

HARVESTER HEAD  SAT318   Caterpillar
Number on catalog scheme:
  For full view, you need register


Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1U-8792 Chain Wrench 1
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g00835609
Install The key on drive shaft (1) of the air compressor.
Install gasket (5) and adapter (6) on the air compressor.
Align the groove in drive gear (2) with the key in drive shaft (1). Install gear (2) on drive shaft (1).
Illustration 2 g00835629
Install spacer (3) and nut (4) on the drive shaft. Position Tool (A) around the drive gear and tighten nut (4) on the drive shaft. Install O-ring seal (7) on the adapter. End By:
Install the air compressor. Refer to , "Air Compressor - Remove and Install".

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.