parts catalog

WINDOW GP-CAB 2333286 - Caterpillar

2333286 WINDOW GP-CAB Caterpillar parts 140M, 14M, 160M WINDOW
Alternative (cross code) number:
Caterpillar 2333286 WINDOW GP-CAB

Buy WINDOW GP-CAB 2333286 Caterpillar genuine, new aftermarket tractor parts with delivery

Compatible equipment models: 2333286:

MOTOR GRADER  140M   14M   160M   Caterpillar
Number on catalog scheme:
  For full view, you need register


Personal injury can result from hydraulic oil pressure and hot oil.Hydraulic oil pressure can remain in the hydraulic system after the engine has been stopped. Serious injury can be caused if this pressure is not released before any service is done on the hydraulic system.Make sure all of the work tools have been lowered to the ground, and the oil is cool before removing any components or lines. Remove the oil filler cap only when the engine is stopped, and the filler cap is cool enough to touch with your bare hand.
Illustration 1 g01146914
Attach Tooling (A) onto the hydraulic tank. Attach an air supply hose onto Tooling (A). Apply 276 to 414 kPa (40 60 psi) of air.
Illustration 2 g01146915
Remove cover assembly (1).
Illustration 3 g01146916
Disconnect hose assemblies (3) from metering pump (2).
Illustration 4 g01146917
Remove nuts (4) in order to disconnect brake control valve (5).
Illustration 5 g01146918
Disconnect bracket assemblies (7) from cab (6).
Illustration 6 g01146919
Disconnect hoses (8) and harness assembly (9).
Illustration 7 g01146920
Illustration 8 g01150734
Turn valves (10) to the OFF position.
Illustration 9 g01146921
Disconnect hose assemblies (11).
Disconnect harness assembly (12).
Disconnect hoses (13).
Illustration 10 g01146922
Remove bolts (14) from cab (6).
Illustration 11 g01146923
Attach Tooling (B) and a suitable lifting device to cab (6). The weight of cab (6) is approximately 1134 kg (2500 lb).
Illustration 12 g01146925
Disconnect ground strap (15).
Remove bolts (16).
Illustration 13 g01146924
Raise the cab in order to gain access to cable assembly (18).
Remove pin (19) and loosen nut (17) in order to disconnect cable assembly (18).
Remove cab (6).

Caterpillar SIS machinery equipment:

Caterpillar SIS

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.