parts catalog

WINDOW-REAR 4645055 - Caterpillar

4645055 WINDOW-REAR Caterpillar parts WINDOW
Alternative (cross code) number:
Caterpillar 4645055 WINDOW-REAR

Buy WINDOW-REAR 4645055 Caterpillar genuine, new aftermarket tractor parts with delivery

Number on catalog scheme: 4
  For full view, you need register


All Models With Sleeve Metering Fuel Systems
Correct part numbers for replacement bearings to use in fuel injection pump housings for sleeve metering fuel systems have been difficult to find. The same two bearings are used in each of the three housing assemblies for four, six and eight cylinder engines. For assistance in the correct identification of these bearings, the parts chart shows the original bearing number, the service replacement number, the bearing location in the housing, and the form number of the special instruction to use for installation.
The original 6N1078 Bearing used at the front end of the housing is available for parts service because it is used in other applications, but is not to be used for replacement in this application. The 5P4810 Bearing, used for replacement of the 6N1078 Bearing, is not completely machined; the bore must be machined to size after the bearing is installed. Complete details for bearing installation and machine work are given in Special Instruction Form SMHS6735, which is sent with each 5P4810 Bearing.
A correction must be made to Special Instruction Form SMHS6735. On Page 3 of the form, Step 5 gives a bearing bore dimension of 25.4127 .013 mm (1.005" .005"). Change this dimension to read: 25.413 .013 mm (1.0005" .0005").The 8N628 Bearing, used for replacement of the original 4N3711 Bearing at the governor end of the housing, does not need to be machined, but must be installed with the groove in the correct radial position. Specific information about installation of this bearing is given in Special Instruction Form SMHS7343, which is sent with each 8N628 Bearing.

Caterpillar parts catalog:

Caterpillar parts catalog
M320 Excavator 6WL00001-UP (MACHINE) POWERED BY 3116 Engine
M318 Excavator 6ES00001-UP (MACHINE) POWERED BY 3116 Engine
M320 Excavator 9PS00001-UP (MACHINE) POWERED BY 3116 Engine
M318 Excavator 8SS00001-UP (MACHINE) POWERED BY 3116 Engine
M318 Excavator 8AL01020-UP (MACHINE) POWERED BY 3116 Engine
M312 Excavator 6TL00410-UP (MACHINE) POWERED BY 3054 Engine
M315 Excavator 7ML00860-UP (MACHINE) POWERED BY 3054 Engine

Parts window Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.