AVSPARE.COM
parts catalog

WIRING GP-PLATFORM 3535163 - Caterpillar



3535163 WIRING GP-PLATFORM Caterpillar parts 770G, 772G WIRING
Rating:
17
Alternative (cross code) number:
CA3535163
353-5163
3535163
Caterpillar 3535163 WIRING GP-PLATFORM

Buy WIRING GP-PLATFORM 3535163 Caterpillar genuine, new aftermarket tractor parts with delivery
TRUCK,

Compatible equipment models: 3535163:

TRUCK  770G   772G   Caterpillar
Number on catalog scheme:
 
  For full view, you need register

Information:

TYPE="LEVEL" DEPTH="1" @@@-->Removal Procedure
Hot engine components can cause injury from burns. Before performing maintenance on the engine, allow the engine and the components to cool.
Wear goggles, gloves, protective clothing, and a National Institute for Occupational Safety and Health (NIOSH) approved P95 or N95 half-face respirator when handling a used Diesel Particulate Filter or Catalytic Converter Muffler. Failure to do so could result in personal injury.
Table 1
Required Tools
Tool Part Number Part Description Qty
A 399-9725 Handle As 1
B Loctite™ Nickel Anti-Seize -
Illustration 1 g06156156
Illustration 2 g06156173
Attach a suitable lifting device to cover assembly (3). The weight of the cover assembly is approximately 24.65 kg (54 lb).
Remove 52 bolts (1) and remove four plates (2).
Remove cover (3).
Illustration 3 g06162597
Remove bolts (4) and remove retaining ring (5).Note: Discard all gaskets and retaining hardware. These parts are one time use only.
Illustration 4 g06163271
Install Tooling (A) to brackets (7) and attach a suitable lifting device. The catalysts weigh approximately 24kg (53lb).
Remove the outer catalyst (8).
Repeat steps 5 and 6 for the inner catalyst.Installation Procedure
Install catalyst (SCR) in reverse order of removal.
Illustration 5 g06165407
Install rear seal (B) between tube (A) and first catalyst assembly (C).
Illustration 6 g06166277
Install front catalyst seal (F) onto the first catalyst assembly (G).
Install second catalyst assembly (E).
Illustration 7 g06163570
Hardware assembly reference.
Illustration 8 g06162722
Hand tighten bolts (4) in sequence shown to a torque of 10 2 N m (7 1 lb ft).
Tighten bolts (4) in sequence shown to a torque of 55 10 N m (41 7 lb ft).Note: Use dowels when installing cover assembly (2) and (3) to aid with alignment of the cover.Note: Tighten cover bolts (1) starting in the middle and working towards the corner.

Caterpillar SIS machinery equipment:

Caterpillar SIS

Caterpillar parts catalog:

Caterpillar parts catalog
772G Off-Highway Truck LTS00001-UP (MACHINE) POWERED BY C18 Engine
770G Off-Highway Truck ECM00001-UP (MACHINE) POWERED BY C15 Engine
770G OEM Off-Highway Truck RMD00001-UP (MACHINE) POWERED BY C15 Engine
772G OEM Off-Highway Truck RMH00001-UP (MACHINE) POWERED BY C18 Engine
770G OEM Off-Highway Truck TWA00001-UP (MACHINE) POWERED BY C15 Engine
772G OEM Off-Highway Truck TWB00001-UP (MACHINE) POWERED BY C18 Engine
770G OFF-Highway Truck ECX00001-UP (MACHINE) POWERED BY C15 Engine
772G Off-Highway Truck LTX00001-UP (MACHINE) POWERED BY C18 Engine


Parts wiring Caterpillar catalog:

3091720 WIRING GP-LIGHTING
770G, 770G OEM, 772G, 772G OEM
3413429 WIRING GP-CAMERA
770G, 770G OEM, 772G, 772G OEM
3240854 WIRING GP-MONITOR
770G, 770G OEM, 772G, 772G OEM
3413383 WIRING GP-PLATFORM
770G, 770G OEM, 772G, 772G OEM
3413443 WIRING GP-LIGHTING
770G, 770G OEM, 772G, 772G OEM
3430801 WIRING GP-LIGHTING
770G, 770G OEM, 772G, 772G OEM
1882647 WIRING GP-GENERATOR
325B L, 330B L, 330C L
2341987 WIRING GP-CONSOLE
345B II, 345B II MH, W345B II
1122025 WIRING GP-PLATFORM
CP-563, CS-531, CS-533, CS-583
2912596 WIRING GP-PLATFORM
CB-434D, CB-534D, CB-564D
Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.