WIRING GP-CONSOLE 3844308 - Caterpillar

Illustration 5 g00654955
Install O-ring seal (21).
Illustration 6 g00654952
Install backup ring (20).
Illustration 7 g00654926
Install cover (19) and screws (18).
Illustration 8 g00654932
Install O-ring seal (17).
Illustration 9 g00654931
Install backup ring (16).
Illustration 10 g00654929
Install cover (15).
Illustration 11 g00654883
Improper assembly of parts that are spring loaded can cause bodily injury.To prevent possible injury, follow the established assembly procedure and wear protective equipment.
Install spring seats (12), spring (13), and bolt (14) on spool (11).
Illustration 12 g00654877
Install spool assembly (10).
Illustration 13 g00654873
Install cap (9) and bolts (8).
Illustration 14 g00654867
Install control valve (7).
Illustration 15 g00654865
Install O-ring seal (6).
Illustration 16 g00654857
Install seat (5).
Illustration 17 g00654852
Install spring (4).
Illustration 18 g00636227
Improper assembly of parts that are spring loaded can cause bodily injury.To prevent possible injury, follow the established assembly procedure and wear protective equipment.
Note: Make sure that the spring is in the correct position when you install the valve body.
Install valve body (3), nuts (2), and nut (1). Tighten nut (1) to a torque of 46 5 N m (34 4 lb ft). Tighten nuts (2) to a torque of 19 2 N m (14 1 lb ft). End By:
Install the counterweight control valve.