0003560 WRENCH Caterpillar parts WRENCH
Alternative (cross code) number:
Pressurized system: Hot coolant can cause serious burn. To open cap, stop engine, wait until radiator is cool. Then loosen cap slowly to relieve the pressure.
Open the access panel on the top of the engine compartment.
Illustration 1 g01012511
The sight gauge for the cooling system is located on the top rear of the radiator on the left side of the machine.
Maintain the coolant level within sight gauge (1) .
If you need to add coolant, remove cooling system pressure cap (2) slowly in order to relieve system pressure. Inspect the seal for cap (2). Replace the seal if the seal is damaged.
Install cap (2). Close the access panel.Note: If you need to add coolant daily, check the cooling system for leaks.